IS4100 features * current transfer ratio ( ctr : min. 50% at i f = 5ma, v ce = 5v ) * isolation voltage between input and output ( viso = 3kvrms ) * compact dual-in-line package 4 channels type * employs double transfer mold technology * rohs compliance * g : halogen free applications * hybrid substrates that require high density mounting. * programmable controllers * system appliances, measuring instruments part no. IS4100 page : 1 of 10
IS4100 outline dimensions *1. 3-digit date code. *2. rank shall be or shall not be marked. part no. : IS4100 page : 2 of 10
IS4100 taping dimensions quantities per reel : package type quantities (pcs) 2000 part no. : IS4100 page : 3 of 10
IS4100 absolute maximum rating ( ta = 25 c ) parameter symbol rating unit 217 227 247 input forward current i f 50 ma reverse voltage v r 6 v power dissipation p 70 mw output collector - emitter voltage v ceo 80 v emitter - collector voltage v eco 7 v collector current i c 50 ma collector power dissipation p c 150 100 mw total power dissipation ptot 200 170 mw *1 isolation voltage viso 3,750 vrms operating temperature topr -55 ~ +110 c storage temperature tstg -55 ~ +150 c *2 soldering temperature tsol 260 (10s) c *1. ac for 1 minute, r.h. = 40 ~ 60% isolation voltage shall be measured using the following method. (1) short between anode and cathode on the primary side and between collector and emitter on the secondary side. (2) the isolation voltage tester with zero-cross circuit shall be used. (3) the waveform of applied voltage shall be a sine wave. *2. for 10 seconds part no. : IS4100 page : 4 of 10
IS4100 electrical - optical characteristics ( ta = 25 c ) parameter symbol min. typ. max. unit conditions input forward voltage v f ? 1.2 1.4 v i f =20ma reverse current i r ? ? 10 a v r =4v terminal capacitance c t ? 30 250 pf v=0, f=1khz output collector dark current i ceo ? ? 100 na v ce =50v, i f =0 collector-emitter breakdown voltage bv ceo 80 ? ? v i c =0.1ma i f =0 emitter-collector breakdown voltage bv eco 7 ? ? v i e =10 a i f =0 transfer characteristics collector current i c 2.5 ? 30 ma i f =5ma v ce =5v *1 current transfer ratio ctr 50 ? 600 % collector-emitter saturation voltage v ce(sat) ? ? 0.4 v i f =2.4ma i c =8ma isolation resistance r iso 5 10 10 1 10 11 ? dc500v 40 ~ 60% r.h. floating capacitance c f ? 0.6 1 pf v=0, f=1mhz response time (rise) t r ? 3 18 s v ce =2v, i c =2ma r l =100 response time (fall) t f ? 4 18 s *1 ctr i i 100% c f = part no. : IS4100 page : 5 of 10
IS4100 0 10 20 30 40 50 60 -25 0 25 50 75 100 ambient temperature,ta ( ) forward current, i f (ma) 1 10 100 0.40.60.81.01.21.41.61.82.0 forward voltage,v f ( v ) forward current, i f ( ma ) ta=100 o c 75 o c 50 o c 30 o c 0 o c 25 o c -3.2 -2.8 -2.4 -2.0 -1.6 -1.2 -0.8 -0.4 0.1 1 10 100 forward current, i f (ma) forward voltage temperature coeffcient vf / ta (mv/oc) 1 10 100 1000 0.511.522.53 pulse forward voltage, v fp (v ) pulse forward current, i fp ( ma ) pulse widths Q 10 us repetitive frequency = 100hz ta = 25 duty ratio pulse width < = 100 s pulse forward current i (ma) 0.1 1 fp 0.01 0.001 10 10000 100 1000 ta= 25 c o 0.0001 0 20 40 60 80 100 120 140 160 -25 0 25 50 75 100 125 ambient temperature,ta( ) collector power dissipation, pc(mw) ltv-217 ltv-227 ltv-247 characteristics curves part no. : IS4100 page : 6 of 10 figure 1. collector power dissipation vs. ambient temperature figure 2. forward current vs. ambient temperature figure 3. forward current vs. forward voltage figure 4. forward voltage temperature coefficient vs. forward current figure 5. pulse forward current vs. duty cycle ratio figure 6. pulse forward current vs. pulse forward voltage
IS4100 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 0 2 4 6 8 101214161820 forward current, i f (ma) collect-emitt voltage, v ce (v) 10ma 7ma 0.5ma 1ma 3ma 5m a 0 10 20 30 40 50 0510 collector-emitter voltage, v ce ( v ) collector currrent, ic ( ma) 50ma 30ma 20ma 10ma i f =5ma p c (max)=150mv 0 5 10 15 20 25 30 35 40 45 50 00.51 collector-emitter voltage, v ce ( v ) collector currrent, ic ( ma) 50ma 30ma 20ma 10ma 5ma i f =2ma 0.0001 0.001 0.01 0.1 0.0001 0.001 0.01 0. forward current, i f (a) collector current, ic (a) 10v 5v vcc = 0.4v 1.00e-10 1.00e-08 1.00e-06 -25-51535557595 ambient temperature, ta( o c) collector dark current, i ceo (a) v ce = 48v 24v 10v 5v 10 100 1000 0.0001 0.001 0.01 0.1 forward current, i f (a) current tranfer ratio ctr (%) 10v 5v vcc=0.4v characteristics curves part no. : IS4100 page : 7 of 10 figure 7. collector-emitter satu ration voltage vs. forward current figure 8. collector current vs. collector-emitter voltage figure 9. collector current vs. small collector-emitter voltage figure 10. collector current vs. forward curent figure 11. collector dark current vs. ambient temperature figure 12. current transfer ratio vs. forward current
IS4100 0.00 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 -30 5 40 75 11 0 ambinet tem p erature , ta ( o c ) collector-emitter saturation voltage (v) i f =8ma i c =2.4ma i f =20ma i c =1ma i f =1ma i c =0.2ma 0.1 1 10 100 -25 0 25 50 75 100 ambient temperature,ta ( o c ) c o ll ector c urrent, i c ( m a ) i f =0.5ma 1ma 5ma 20ma 25ma 0.1 1 10 100 -20 0 20 40 60 80 100 ambient temperature ta( o c) switching time, t(us) t on t s t off vcc=5v i f =16ma r l =1.9k -8 -6 -4 -2 0 110100 frequency ( khz ) v o ( db ) vcc=5v ic=2ma ta=25 o c r l =100 1k 0.1 1 10 100 1000 1 10 100 load resistance, r l ( k ? ) switching time ( s ) t off t s t on ta = 25 vcc = 5v r l = 1.9k characteristics curves part no. : IS4100 page : 8 of 10 figure 13. collector-emitter saturation voltage vs. ambient temperature figure 14. collector current vs. ambient temperature figure 15. switching time vs. load resistance figure 16. switching time vs. ambient temperature figure 17. frequency response
IS4100 switching time test circuit temperature profile of soldering reflow (1) one time soldering reflow is recommended within the condition of temperature and time profile shown below. part no. : IS4100 page : 9 of 10
IS4100 temperature profile of soldering reflow (2) when using another soldering method such as infrated ray lamp, the temperature may rise partially in the mold of the device. keep the temperature on the package of th e device within the condition of above (1) notes: - isocom is continually improving the quality, reliability, function or design and isocom reserves the right to make changes without further notices. - the products shown in this publication are designed for the general use in electronic applications such as office automation equipment, communications devices, audio/visual equipment, electrical application and instrumentation. - for equipment/devices where high reliability or safety is required, such as space applications, nuclear power control equipment, medical equipment, etc, please contact our sales representatives. - when requiring a device for any ?specific? application, please contact our sales in advice. - if there are any questions about the contents of this publication, please contact us at your convenience. - the contents described herein are subject to change without prior notice. - do not immerse unit?s body in solder paste. part no. : IS4100 page : 10 of 10
|
